User manual

Operating basics
48
AFG1022 Quick Start User Manual
15. Press Output Setup to set
output load value. Press
CH1Load or CH2Load to
toggle 50 Ω and High Z. At
50 Ω status, use the general
purpose knob to adjust the
value on the current cursor
and use to
/ move
cursor. Use the numeric
keypad to adjust the
parameters and then choose
proper unit. The load range is
1 Ω to 10 KΩ.
NOTE: Please setup the correct
load for right application.
16. Press System to display the
submenu.
Language (See page6,
Select a local language)
PowerOn (See page5,
Change instrument settings
at power-on)
Set to Default (See page15,
Default setup)
17. Press NextPage to enter
next submenu.
18. Press Beeper to toggle the
beep sound Off and On.
19. Press Clk Ref to toggle the
clock reference source
between Internal and External.
20. Update firmware (See
page9, Update your
instrument firmware)