User manual

Operating basics
30
AFG1022 Quick Start User Manual
10. If you want to save the
waveform to internal memory,
select INTER, press Enter.
Use the front panel general
purpose knob to select a file
from USER0 through
USER255. Press Save.
NOTE:
The file size is displayed on the
right side. 0B indicates the file is
empty.
When creating a new waveform,
the waveform data is in Edit
Memory. If you do not save it, the
data still exists in the Edit Memory.
The data may be changed or
cleared after creating a new
waveform or receiving the related
command. The data will be lost
when the power is turned off.
11. To save the waveform to USB
memory, first insert a USB
memory device into the port on
the front panel.
Use the general purpose knob to
select USBDEVICE, and then
press Enter.
The instrument lists a directory
of the folders and files on the
USB memory device. Select a
folder or file using the knob to
scroll up and down the list.
To enter the current folder, press
Enter. To return to the upper
directory, press Back. Press
SaveAs; the waveform will be
saved in current directory.
An input keyboard will appear.
Use the general purpose knob to
choose characters. Press
ABC/abc to toggle between
upper-case and lower- case.
Press Select to select the
corresponding character. Press
Delete to delete the last
character. Press DONE to save
the waveform as a file with the
.tfw suffix. Press Cancel to
cancel to current operation.
NOTE: The length of file
name limits to 20 characters.