User manual

Getting started
AFG1022 Quick Start User Manual
11
9. The instrument displays a
message telling you not to
remove the USB device or
power off the instrument
until the update process
is complete. The progress
bar
of the screen
indicates
the update
process is in
progress.
NOTE: A firmware update
usually takes
approximately
under a minute. Do
not remove
the USB memory
during the
update process.
NOTE: If you accidentally
removed the
USB memory
during the
update process, do
not power
off the instrument.
Repeat the
installation
process from step
3.
10. Wait until the instrument
displays a message
saying that the operation
is complete.
NOTE: If the operation
complete message is not
displayed, do not power off
the instrument. Repeat the
installation process from step
2 using a different type of
USB
memory device.
11. Remove the USB memory
device from
the
front-panel USB
connector.
12. Push the front-panel
Utility button to display
the Utility menu.
Confirm that the
firmware has been
updated.