Instructions
Table Of Contents
- Table of contents
- Preface
- Getting started
- General features
- Before installation
- Standard accessories
- Operating requirements
- Power the instrument on and off
- Change instrument settings at power-on
- Erase waveforms from memory
- Select a local language
- Protect your instrument from misuse
- General care
- Update your instrument firmware
- Equivalent output circuits
- Instrument front panel, interface, and rear panel
- Operating basics
- Quick tutorial: How to select a waveform and adjust parameters
- Quick tutorial: How to generate a sine waveform
- Quick tutorial: Instrument help system
- Generate a pulse waveform
- Generate a built-in waveform
- Create/save a user-defined waveform
- Recall a user-defined waveform
- Generate noise
- Generate DC
- Sweep a waveform
- Modulate a waveform
- Generate a burst waveform
- Copy channel setting
- USB memory device
- Utility menu
- Save/recall instrument setup
- Application examples
- Appendix A: Line fuse replacement
- Index
18
AFG1000 Series Quick Start User Manual
Instrument front panel, interface, and rear panel
Select waveform
The instrument can provide five standard waveforms (Sine, Square, Ramp,
Pulse and Noise). The instrument can also provide user-defined arbitrary
waveforms. You can create, edit, and save your custom waveforms.
You can also create modulated waveforms using the Mod panel button and then
Mod bezel button menus. The following table shows the combination of
modulation type and the shape of the output waveform.
Modulation, sweeping, and burst modes are only available in Ch1 on AFG1022.
AFG1022
Sine,
Square,
Ramp
Pulse Noise Arb
AM
√
√
FM
√
√
PM
√
√
FSK
√
√
Sweep
√
√
Burst
√
√
√
Continuous
√
√
√
√
AFG1062
Sine,
Square,
Ramp
Pulse Noise Arb
AM
√
√
FM
√
√
PM
√
√
PWM
√
FSK
√
√
ASK
√
√
PSK
√
√
Sweep
√
√
Burst
√
√
√
Continuous
√
√
√
√