Datasheet

Sweeping
1
Carrier waveforms Sine, square, ramp
Minimum start-stop frequency 1 μHz
Maximum start-stop frequency Sine: 25 MHz
Square: 12.5 MHz
Ramp: 1 MHz
Type Linear, logarithmic
Direction Up / down
Sweep time 1 ms to 500 s ± 0.1%
Trigger sources Internal, external, or manual
Burst
1
Waveforms Sine, square, ramp, pulse, arbitrary except DC and noise
Types Count (1 to 50,000 cycles), infinite, gated
Start phase -360° to +360°
Trigger sources Internal, external, or manual
Internal trigger interval (40 ns or (cycles x period) to 500 s) ± 1%
Gate source External trigger
Frequency counter
Function Frequency, period, positive pulse width, duty cycle
Frequency range 100 mHz to 200 MHz
Frequency resolution 6 digits
Coupling mode AC, DC
Voltage Range and Sensitivity, DC
coupled (non-modulation signal)
100 mHz to 100 MHz 250 mV
p-p
to 5 V
p-p
(AC + DC)
100 MHz to 200 MHz 450 mV
p-p
to 3 V
p-p
(AC + DC)
Voltage range and sensitivity, AC
coupled (non-modulation signal)
1 Hz to 100 MHz 250 mV
p-p
to 5 V
p-p
100 MHz to 200 MHz 450 mV
p-p
to 4 V
p-p
Pulse width and duty cycle
measure
1 Hz to 10 MHz
Datasheet
6 www.tektronix.com