Datasheet

Arbitrary waveform
Range 1 μHz to 10 MHz
Arbitrary waveform in burst mode 2 mHz to 10 MHz
Effective analog bandwidth (-3 dB) 30 MHz
Non-volatile memory 64 MByte
Memory
Length 2 to 8,192: 125 MS/s
Sampling rate 125 MS/s
Vertical resolution 14 bits
Rise and fall time < 10 ns
Jitter (rms) < 6 ns (typical)
Frequency
Resolution 1 μHz or 12 digits
Internal reference stability ±1 ppm at 0 - 40 °C
Internal reference aging ±1 ppm per year
Amplitude
Range 1 mV
p-p
to 10 V
p-p
, 50 Ω load
2 mV
p-p
to 20 V
p-p
, open circuit or high Z load
Accuracy ±(1% of setting +1 mV
p-p
), (1 kHz sine waveform, 0 V offset)
Resolution 1 mV
p-p
, 1 mV
rms
or 4 digits
Units V
p-p
, V
rms
Output impedance 50 Ω (typical)
Local impedance setting Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)
Isolation No floating ground, signal ground connected to chassis ground
Signal output protection Short-circuit tolerance, main output automatically disabled when over current
Datasheet
4 www.tektronix.com