Datasheet

Ease of use
The high-resolution 3.95-inch color TFT display shows relevant settings
and parameters in both text and graphic formats, which give users full
confidence in their settings, and let them focus on the task at hand. The
front panel shortcut buttons and rotary knob make accesses to most
frequently used functions and settings with minimum effort and time. The
built-in 64-MByte non-volatile memory together with USB stick memory
interface, provide unlimited space for user-defined waveform storage.
Software and solutions
Compatible with ArbExpress, the user-defined arbitrary waveforms
generated by the free software can be loaded on the AFG1022 easily with a
USB memory stick.
As a building block of Tektronix educational solution, the AFG1022 can be
embedded into TekSmartLab and enable a cost efficient and effective way
of teaching, learning, and lab management.
Specifications
Channels
Number of channels 2
Built-in waveforms
Built-in waveforms Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms
Sine wave
Range 1 μHz to 25 MHz
Sine wave in burst mode 2 mHz to 25 MHz
Effective maximum frequency out 25 MHz
Amplitude flatness (1 V
p-p
)
<10 MHz ±0.2 dB
10 MHz to 25 MHz ±0.3 dB
Harmonic distortion < -50 dBc, 1 V
p-p
, 1 μHz to 25 MHz
Total harmonic distortion < 0.2% (10 Hz to 20 kHz, 1 V
p-p
)
Spurious < -45 dBc, 1 V
p-p
, 1 μHz to 25 MHz
Phase noise 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 V
p-p
(typical)
Residual clock noise -57 dBm (typical)
Datasheet
2 www.tektronix.com