Datasheet

Input-output ports

USB 2.0 high-speed host port Supports USB mass storage devices and keyboard. Two ports on front and two ports on rear of instrument.

USB 2.0 device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and

direct printing to all PictBridge-compatible printers.

Printing Print PictBridge printer or to a printer that supports e-mail printing. Note: This product includes software developed by the

OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)

LAN port RJ-45 connector, supports 10/100/1000 Mb/s

Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. XGA resolution.

Probe compenstor output voltage

and frequency

Front-panel pins

Amplitude 0 to 2.5 V

Frequency 1 kHz

Auxiliary out Rear-panel BNC connector

OUT

(Hi): ≥2.5 V open circuit, ≥1.0 V 50 Ω to ground

OUT

(Lo): ≤0.7 V into a load of ≤4 mA; ≤0.25 V 50 Ω to ground

Output can be configured to provide a pulse out signal when the oscilloscope triggers, the internal oscilloscope reference clock

out, or an event out for limit/mask testing.

External reference input Time-base system can phase lock to an external 10 MHz reference (10 MHz ±1%)

Kensington-style lock Rear-panel security slot connects to standard Kensington-style lock.

VESA mount Standard (MIS-D 100) 100 mm VESA mounting points on rear of instrument.

LAN eXtensions for Instrumentation (LXI)

Class LXI Core 2011

Version V1.4

MDO4000C Series Oscilloscope