Datasheet

Spurious response
2
nd
and 3
rd
harmonic
distortion (>100 MHz)
< -60 dBc (< -60 dBc, typical), with auto settings on and signals 10 dB below reference level
2
nd
and 3
rd
harmonic
distortion (9 kHz to 100 MHz )
< -57 dBc (< -65 dBc, typical), with auto settings on, signals 10 dB below reference level, and reference level ≤ -15 dBm
2
nd
order intermodulation
distortion (>200 MHz)
< -60 dBc (< -65 dBc, typical), with auto settings on and signals 10 dB below reference level
2
nd
order intermodulation
distortion (>100 MHz to
≤200 MHz)
<-57 dBc (<-60 DBc, typical), with auto settings on and signals 10 dB below reference level
2
nd
order intermodulation
distortion (10 MHz to 100 MHz)
< -60 dBc (< -65 dBc, typical), with auto settings on, signals 10 dB below reference level, and reference level ≤ -15 dBm
3
rd
order intermodulation
distortion (>10 MHz)
< -62 dBc (<-65 dBc, typical), with auto settings on and signals 10 dB below reference level, and reference levels < -15 dBm
3
rd
order intermodulation
distortion (9 kHz to 10 MHz)
< -62 dBc (<-65 dBc, typical), with auto settings on and signals 10 dB below reference level, and reference levels < -15 dBm
A/D spurs < -60 dBc (< -65 dBc, typical), with auto settings on and signals 5 dB below reference level. Excludes A/D aliasing spurs
A/D aliasing spurs At (5 GHz - F
in
) and (8 GHz - F
in
): <-55 dBc (<-60 dBc, typical), with auto settings on and signals 5 dB below reference level
Specifications that only apply
to models with option SA6
IF Rejection: (All Input Frequencies except: 1.00 GHz to 1.25 GHz and 2 GHz to 2.4 GHz): < -55 dBc, typical
IF spurs at (5 GHz - F
in
) for input frequencies from 1.00 GHz to 1.25 GHz: < -50 dBc, typical
IF spurs at (6.5 GHz -F
in
) for input frequencies from 2 GHz to 2.4 GHz: < -50 dBc, typical
Image Rejection: < -50 dBc (for input frequencies from 5.5 GHz to 9.5 GHz)
Residual response < -85 dBm (< -78 dBm at 3.75 GHz, 4.0 GHz, 5.0 GHz, and typical 6.0 GHz; < -73 dBm at 2.5 GHz) with ≤ -25 dBm reference level
and input terminated with 50 Ω
Absolute amplitude accuracy Accuracy of power level measurements at the center frequency. At frequencies away from center frequency, add Channel
Response to the Absolute Amplitude Accuracy. Applies to signal to noise ratios > 40 dB.
< ± 1.0 dB (< ±0.5 dB, typical), 18 °C - 28 °C temperature range, 50 kHz to 6 GHz frequency range, reference levels -25, -20, -15,
-10, -5, 0, 5, 10 dBm
< ± 1.0 dB, typical, 50 kHz to 6 GHz, all other reference levels, 18 °C - 28 °C temperature range
< ±1.5 dB, typical, 50 kHz to 6 GHz, all reference levels, 0 ⁰C to 50 ⁰C temperature range
< ± 2.0 dB, typical, 9 kHz to 50 kHz, all reference levels, 18 °C to 28 °C temperature range
< ± 3.0 dB, typical, 9 kHz to 50 kHz, all reference levels, 0 °C to 50 °C temperature range
Channel response Valid over 18 - 28 °C temperature range
Specification applies to signal-to-noise ratios > 40 dB
Measurement center
frequency range
Span Amplitude flatness,
pk-pk
Amplitude flatness,
RMS
Phase linearity, RMS
15 MHz - 6 GHz 10 MHz 0.3 dB 0.15 dB 1.5 °
60 MHz - 6 GHz ≤ 100 MHz 0.75 dB 0.27 dB 1.5 °
170 MHz - 6 GHz ≤ 320 MHz 0.85 dB 0.27 dB 2.5 °
510 MHz - 6 GHz ≤ 1,000 MHz 1.0 dB 0.3 dB 3.0 °
Any, (for start frequency
> 10 MHz)
> 1,000 MHz 1.2 dB N/A N/A
MDO4000C Series Oscilloscope
2- Spectrum Analyzer (requires Option SA3 or SA6)
www.tek.com 27