Datasheet

ManualsBrandsTektronix ManualsTest & MeasurementCarrying Case - Tektronix DPO4000B/MSO Series Oscilloscopes

Serial bus technologies supported by the MDO4000C

Technology Trigger, Decode,

Order product

Embedded I

C Yes DPO4EMBD

SPI Yes DPO4EMBD

Computer RS232/422/485,

UART

Yes DPO4COMP

USB USB LS, FS, HS Yes (trigger on LS

FS, HS)

HS available only

on 1 GHz models

DPO4USB

Ethernet 10Base-T

100Base-TX

Yes DPO4ENET

Automotive CAN, CAN FD (ISO

and non-ISO)

Yes DPO4AUTO or

DPO4AUTOMAX

LIN Yes DPO4AUTO or

DPO4AUTOMAX

FlexRay Yes DPO4AUTOMAX

Military and

Aerospace

MIL-STD-1553 Yes DPO4AERO

Audio I

S Yes DPO4AUDIO

LJ, RJ Yes DPO4AUDIO

TDM Yes DPO4AUDIO

Event table – In addition to seeing decoded packet data on the bus

waveform itself, you can view all captured packets in a tabular view much

like you would see in a software listing. Packets are time stamped and

listed consecutively with columns for each component (Address, Data,

etc.). You can save the event table data in .csv format.

Event table showing decoded identifier, DLC, DATA, and CRC for every CAN packet in a

long acquisition.

Search (serial triggering) – Serial triggering is very useful for isolating the

event of interest, but once you’ve captured it and need to analyze the

surrounding data, what do you do? In the past, users had to manually scroll

through the waveform counting and converting bits and looking for what

caused the event. You can have the oscilloscope automatically search

through the acquired data for user-defined criteria including serial packet

content. Each occurrence is highlighted by a search mark. Rapid navigation

between marks is as simple as pressing the Previous (←) and Next (→)

buttons on the front panel.

6 – Digital Voltmeter (DVM) and Frequency Counter

The MDO4000C contains an integrated 4-digit digital voltmeter (DVM) and

5- digit frequency counter. Any of the analog inputs can be a source for the

voltmeter, using the same probes that are already attached for general

oscilloscope usage. The easy-to-read display offers you both numeric and

graphical representations of the changing measurement values. The

display also shows minimum, maximum, and average values of the

measurement as well as the range of values measured over the previous

five second interval. The DVM and frequency counter is available on any

MDO4000C and is activated when you register your product.

A DC measurement value is shown with a five second variation along with minimum,

maximum, and average voltage values. The frequency of the waveform is also shown.

MDO4000C Series Oscilloscope