Datasheet

Current Probes
A621 • A622 Data Sheet
A621
Features & Benefits
A621
AC–5Hzto50kHz
100mAto2000APeak
For DMMs and Oscilloscopes
Clamp On
A622
AC/DC – 100 kHz
50 mA to 100 A Peak
For DMMs and Oscilloscopes
Applications
Motor Drives
Inverters
Power Supplies
Avionics
A622
The A600 Series current pro bes high-value curre nt probes are specifically
designed to support measurement s you make with your TekMeter
®
or
oscilloscope*
1
.
A621 2000 Amp AC Current Probe/BNC
This in dustrial-style clamp-on probe has a BNC connector and may be
used with a shrouded b anana plug adapter*
1
soitcanbeusedondigital
multimeters, TekMeter, and scopes. The A621 can measure AC currents
from 100
mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It
provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
A622 100 Amp AC/DC Current Probe/BNC
This "lo
ng nose" style clamp-on probe uses a Hall Effect current sensor
to provide a voltage output to oscilloscopes. It has a BNC connector and
may be used with a shrouded banana plug adapter*
1
so it can also be used
on digital multimeters, TekMeter, and scopes. The A622 can measure
AC/DC currents from 50 m A to 100 A peak over a freque ncy range of DC to
100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
Recommended Products
TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes
and DMM4020*
1
, DMM4040*
1
, and DMM4050*
1
digital multimeters.
*
1
For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead
adapter is required.