Printer User Manual
Table Of Contents
- LaserWriter 8.x printer driver
- Installing the LaserWriter 8.x driver
- Using the LaserWriter 8.x driver with a Phaser 340...
- 1. Decompress the Phaser340Apps.sea archive file...
- 2. Locate and open the 4.x PPDs Folder in the fold...
- 3. Place the correct PPD file with other PPDs for ...
- 4. Open the Chooser.
- 5. Select the LaserWriter 8.x driver icon.
- 6. Select your printer from the list.
- 7. Still in the Chooser, click the Setup button to...
- 8. In the dialog box that appears, click the More ...
- 9. Click the Printer Info button, then click the U...
- 10. Record the information on PostScript Version a...
- 11. Click the Select PPD button; the Printer Descr...
- 12. Select the PPD file you installed in Step 3, e...
- 13. Make sure the information under Printer Model ...
- 14. Click Select.
- 15. Click Configure. In the field for Memory Confi...
- 16. Click OK in two dialog boxes and close the Cho...
- 17. Open the Page Setup dialog box to see a pop-up...
- 18. Open the Print dialog box and select the Paper...
- 19. In the Print dialog box, click the Options but...
16.
Click
OK
in two dialog boxes and close the
Chooser
.
17.
Open the
Page Setup
dialog box to see a pop-up menu with all of
the printer’s supported paper sizes.
18.
Open the
Print
dialog box and select the
Paper Source
.
19.
In the
Print
dialog box, click the
Options
button to see the
Print
Options
dialog box. There are printer-specific
TekColor
features
listed at bottom of the dialog box.
Source: 070-9099-00 C2