Instructions

TEK.COM | 13
POWER SUPPLIES SELECTOR GUIDE
Series 2230G Features
■ One 195 W model and two 375 W models
■ 195 W model has two 30 V, 3 A channels and one 5 V,
3 A channel
■ 375 W models have two 30 V, 6A channels or two 60 V,
3 A channels and one 5 V, 3 A channel
■ All channels are independently controlled and are
isolated to power a wide range of test setups
■ All channels have remote sensing so that the
programmed voltage is accurately applied to the load
■ Set and monitor output voltages with 0.03% basic
accuracy and 1 mV resolution
■ Monitor load current with 0.1% basic accuracy and 1 mA
resolution
■ Low noise, linear regulation with <1 mVrms
ripple and noise
■ Combine channels in series to output as high as 60 V and
in parallel with two or three channels to create capacity
as high as 15 A (2230G-30-6)
■ Voltage and current outputs of three channels are
displayed simultaneously for immediate observation of
each output state
■ USB, GPIB, and RS-232 interfaces and rear panel
connections for automated test convenience
Easily test a bipolar circuit over its
operating voltage range using the tracking
function so both the +voltage and the
– voltage change together.
Power two isolated circuits with
isolated output channels.
+ +– –
CH1 0 -30V CH2 0-30V CH3 0-5.5V
2230-30-3 TRIPLE CHANN EL DC POWER SUPP LY
V+
Channel 1
Power
Supply
Channel 1
Load
(Device, Circuit,
Module)
Power
Supply
Channel 2
+
+
–
–
Channel 2
(relative to
circuit common)
V–
Series 2230G
High Power, 3-Channel,
Programmable Power Supplies
For Design and Test of high power
components and circuits