User's Manual

16 Nov 2022 WPC-11C-TEK User Manual and Specification (rev0.13)
Page 3
Condition
Functions
Signal
LED & Buzzer
Press Call Button
• Tx Call Signal with LED flashing
0x06*
Beep x 1
ON for 5s ->
Flash every 3s ->
until reset
Press Call Button
on handset
• Tx Call Signal with LED flashing
0x06*
Beep x 1
ON for 5s ->
Flash every 3s ->
until reset
Press Reset
Button
• Tx Reset Signal with LED function
0x0C
Beep x 1
LED flashes 3 times
(0.5s ON -> 0.5s OFF)
Press Staff
Emergency
Button
• Tx Emergency Signal with LED function
0x07
Beep x 2
LED flash (0.25s ON ->
0.25s OFF) ->
until reset
Press Check-in
Button
• Tx Checking Signal
0x01
Beep x 1
LED flashes 3 times
(0.5s ON -> 0.5s OFF)
Press Rounding
Button
• Tx Rounding Signal
0x03
Beep x 1
LED flashes 3 times
(0.5s ON -> 0.5s OFF)
Survey function
• Tx Call Signal with 3dB weaker with LED
function
0x06*
Beep x 1
LED ON ->
until Tx finished
Tracking Code
• Tx Tracking Code IF not in Call or
Emergency State.
0x2C
N/A
Handset Removal
• Tx Handset Removal Signal
0x04
Beep x 1
ON for 5s -> Flash
every 3s
Handset Removal
Reset
• Tx Handset Removal Signal Reset
0x5C
Beep x 1
LED Flash 3 times
(0.5s ON -> 0.5s OFF)
Handset Plugin
• Tx Handset Plugin Signal
0x1C
Beep x 1
LED Flash 3 times
(0.5s ON -> 0.5s OFF)
Low Battery
• Tx Low battery signal
0x09
LED 0.1s ON -> 5s OFF
until battery is
replaced
Table 2-1. Functions under different conditions
Note: The time durations stated above are approximate.
* Call button signal of 0x06 is configurable