User's Guide

Gen2 BLE Sensor Family User Guide T0007796_UG_Portable Version 0.2
TEKTELIC Communications Inc. Page 23 of 30
3. Check that the gasket is undamaged and still properly seated with an adhesive on the
battery cover. It should look similar to Figure 2-7.
Figure 2-7: Proper Gasket Appearance
4. Before reattaching the battery cover, ensure the proper orientation of the cover
by placing the battery symbol next to the mounting feature. You can also ensure proper
orientation by closing it with the semi-circular rib against the battery, and the T-shaped
rib against the PCBA (see Figure 2-8).
Figure 2-8: Proper Replacement Orientation of the Battery Cover
5. Reassemble the cover to the chassis by using the 4x phillips head screws, using a #1 size
screwdriver and up to 0.23 Nm of torque.