User's Guide

Kona Enterprise Gateway T0007323_UG Version 1.3
TEKTELIC Communications Inc. Page 10 of 18
2.2 Unpacking and Inspection
The following should be considered during the unpacking of a new Kona Enterprise Gateway.
1. Inspect the shipping carton and report any significant damage to TEKTELIC.
2. Unpacking should be conducted in a clean and dry location when possible.
3. Do not discard the shipping box or foam inserts as they will be required if a unit is returned
for repair or re-configuration.
2.3 Dual SIM Slot Operation
The Kona Enterprise Gateway is equipped with a dual SIM slot which can be configured to the
user’s liking. The primary and secondary slots can be configured in the software configuration.
Prior to inserting or replacing SIM, please ensure that the unit is turned off. If 2 SIM cars are used,
and the primary SIM fails or is missing, the failover mechanism will automatically switch over to
the secondary SIM. When only one SIM is used, please place the SIM in slot 0 (primary SIM / inner
slot) as indicated by Figure 4. Slot 1 is for the secondary SIM (outer slot).
Figure 4: SIM Tray Layout of Slot 0 and Slot 1