EB410.2 Manual
Table Of Contents
- P1_EB410_2instructions_FrontCover
- P2_EB410_2instructions_Intro
- P3_EB410_2instructions_BagA
- P4_EB410_2instructions_BagB
- P5_EB410_2instructions_BagC
- P6_EB410_2instructions_BagD
- P7_EB410_2instructions_BagE
- P8_EB410_2instructions_BagF
- P9_EB410_2instructions_BagF
- P10_EB410_2instructions_BagF
- P11_EB410_2instructions_BagG
- P12_EB410_2instructions_BagH
- P13_EB410_2instructions_BagI
- P14_EB410_2instructions_BagI
- P15_EB410_2instructions_BagJ
- P16_EB410_2instructions_BagJ
- P17_EB410_2instructions_BagK
- P18_EB410_2instructions_BagL
- P19_EB410_2instructions_Shocks
- P20_EB410_2instructions_BagM
- P21_EB410_2instructions_BagM
- P22_EB410_2instructions_BagM
- P23_EB410_2instructions_BagN_O
- P24_EB410_2instructions_BagO
- P25_EB410_2instructions_BagP
- P26_EB410_2instructions_SpareParts
- P27_EB410_2instructions_Setup_1
- P28_EB410_2instructions_Setup_2
- P29_EB410_2instructions_RadioInfo
- P30_EB410_2instructions_Maintenance
- P31_EB410_2instructions_SetUpSheet_Filled
- P32_EB410_2instructions_BackCover
TKR6250
TKR6253B
28.50
Note: Notch always
goes on
left side of vehicle.
Note: Always press
on with
T
logo visible.
Actual Size
Left/Right x 2pcs
TKR6253B
TKR6208
TKR6527B
TKR6666
TKR1211
TKR6681
TKR6208
TKR1211
TKR1211
TKR6527B
TKR1211
Step
F-3
Step
F-4
Step
F-5
TKR6208
M3x8mm Ball Stud
x2
Build Note: Hold the turnbuckle stationary with pliers and
push the rod end hard onto the turnbuckle while turning
at the same time. Keep in mind that one end of the
turnbuckle has normal threads and the other has reverse threads.
Start the rod end straight and it will thread on straight.
Build Tip: Use some grease or Chapstick
on the threads to help prevent “pop-o” when
adjustments are being made.
TKR1211
M3 Lock Nut Flange Black
x4
Bag F
Rear Camber Links
9