EB410.2 Manual
Table Of Contents
- P1_EB410_2instructions_FrontCover
- P2_EB410_2instructions_Intro
- P3_EB410_2instructions_BagA
- P4_EB410_2instructions_BagB
- P5_EB410_2instructions_BagC
- P6_EB410_2instructions_BagD
- P7_EB410_2instructions_BagE
- P8_EB410_2instructions_BagF
- P9_EB410_2instructions_BagF
- P10_EB410_2instructions_BagF
- P11_EB410_2instructions_BagG
- P12_EB410_2instructions_BagH
- P13_EB410_2instructions_BagI
- P14_EB410_2instructions_BagI
- P15_EB410_2instructions_BagJ
- P16_EB410_2instructions_BagJ
- P17_EB410_2instructions_BagK
- P18_EB410_2instructions_BagL
- P19_EB410_2instructions_Shocks
- P20_EB410_2instructions_BagM
- P21_EB410_2instructions_BagM
- P22_EB410_2instructions_BagM
- P23_EB410_2instructions_BagN_O
- P24_EB410_2instructions_BagO
- P25_EB410_2instructions_BagP
- P26_EB410_2instructions_SpareParts
- P27_EB410_2instructions_Setup_1
- P28_EB410_2instructions_Setup_2
- P29_EB410_2instructions_RadioInfo
- P30_EB410_2instructions_Maintenance
- P31_EB410_2instructions_SetUpSheet_Filled
- P32_EB410_2instructions_BackCover
TKR1601
TKR6610 - 1.7mm
TKR6547
Note: Do not over-tighten.
Note: Screw
these set screws in
gently, until they
just touch the
sway bar, then
back o just
slightly so the
sway bar is free.
TKR6544B
TKR6542HD
TKR1601
TKR6590
TKR6543HD
TKR6523HD
TKR6544B
TKR1405
Bag E
Rear End
Assembly
Below options sold separately.
*TKR6610 - 1.5mm
*TKR6610 - 1.6mm
*TKR6610- 1.8mm
*TKR6610- 1.9mm
(Option)
Thread
Lock
TKR1611
TKR1601
TKR6555
TKR6206
TKR6253B
TKR6544B
TKR6584
*TKR6524B
(Option)
TKR1409
TKR6544B
x5
TKR1601
M3x4mm Set Screw
Step
E-1
Step
E-2
Step
E-3
TKR1405
M3x14mm Button Head Screw
x2
TKR1463
M2.5x6mm Button Head Screw
x2
TKR1611
M4x8mm Set Screw
x2
TKR6206
M3x6mm Ball Stud
x2
TKR1463
TKR1463
TKR1409
M3x20mm Button Head Screw
x2
7
Stock Position
(”C” Block)
Note: With center dot
inserts, Anti-Squat = 2°
Stock Position
(”D” Block)
Note: With center dot
inserts, Rear Toe = 2°
Wheelbase Shims
1mm
1mm
large 1mm
front
rear
small .5mm