EB410.2 Manual
Table Of Contents
- P1_EB410_2instructions_FrontCover
- P2_EB410_2instructions_Intro
- P3_EB410_2instructions_BagA
- P4_EB410_2instructions_BagB
- P5_EB410_2instructions_BagC
- P6_EB410_2instructions_BagD
- P7_EB410_2instructions_BagE
- P8_EB410_2instructions_BagF
- P9_EB410_2instructions_BagF
- P10_EB410_2instructions_BagF
- P11_EB410_2instructions_BagG
- P12_EB410_2instructions_BagH
- P13_EB410_2instructions_BagI
- P14_EB410_2instructions_BagI
- P15_EB410_2instructions_BagJ
- P16_EB410_2instructions_BagJ
- P17_EB410_2instructions_BagK
- P18_EB410_2instructions_BagL
- P19_EB410_2instructions_Shocks
- P20_EB410_2instructions_BagM
- P21_EB410_2instructions_BagM
- P22_EB410_2instructions_BagM
- P23_EB410_2instructions_BagN_O
- P24_EB410_2instructions_BagO
- P25_EB410_2instructions_BagP
- P26_EB410_2instructions_SpareParts
- P27_EB410_2instructions_Setup_1
- P28_EB410_2instructions_Setup_2
- P29_EB410_2instructions_RadioInfo
- P30_EB410_2instructions_Maintenance
- P31_EB410_2instructions_SetUpSheet_Filled
- P32_EB410_2instructions_BackCover
TKR6517
TKR5144
Bag A
Center Dierential
(overview)
TKR6522B
TKR6513X
TKR6550
TKR6550
TKR6515
TKR6511
*TKR6670
(Option)
TKR5144
TKR6517
TKR6515
Step
A-2
Step
A-4
Fill Level
Step
A-3
Step
A-1
TKR5144
Dierential 0-rings
x2
TKR6517
Dierential Shims (5x14mm)
x2
TKR1303
M2.5x10mm Flat Head Screw
x4
TKR1303 x4
TKR6550
TKR6513X
Di
Oil
TKR6522B
*TKR6670
(Option)
TKR6514
TKR6514
TKR6514
TKR6514
TKR6517
TKR6550
TKR5144
TKR1303 x4
3
Grease
Grease
Grease
Grease
Fill with #30,000 CST oil to
1mm below full
DO NOT OVER FILL
Note: Apply grease to the
groove in the outdrive.
Note: These screws
only need to be snug.
Do not over-tighten
or the internal gears
will bind up.
Note: Apply grease to the
groove where the o-ring is
placed as well as the o-ring itself.
TKR6514
TKR6514