EB410.2 Manual
Table Of Contents
- P1_EB410_2instructions_FrontCover
- P2_EB410_2instructions_Intro
- P3_EB410_2instructions_BagA
- P4_EB410_2instructions_BagB
- P5_EB410_2instructions_BagC
- P6_EB410_2instructions_BagD
- P7_EB410_2instructions_BagE
- P8_EB410_2instructions_BagF
- P9_EB410_2instructions_BagF
- P10_EB410_2instructions_BagF
- P11_EB410_2instructions_BagG
- P12_EB410_2instructions_BagH
- P13_EB410_2instructions_BagI
- P14_EB410_2instructions_BagI
- P15_EB410_2instructions_BagJ
- P16_EB410_2instructions_BagJ
- P17_EB410_2instructions_BagK
- P18_EB410_2instructions_BagL
- P19_EB410_2instructions_Shocks
- P20_EB410_2instructions_BagM
- P21_EB410_2instructions_BagM
- P22_EB410_2instructions_BagM
- P23_EB410_2instructions_BagN_O
- P24_EB410_2instructions_BagO
- P25_EB410_2instructions_BagP
- P26_EB410_2instructions_SpareParts
- P27_EB410_2instructions_Setup_1
- P28_EB410_2instructions_Setup_2
- P29_EB410_2instructions_RadioInfo
- P30_EB410_2instructions_Maintenance
- P31_EB410_2instructions_SetUpSheet_Filled
- P32_EB410_2instructions_BackCover
TKR1601
Bag G
Front End
Assembly
TKR1405
TKR1409
Step
G-2
Step
G-1
Step
G-3
TKR1409
M3x20mm Button Head Screw
x2
TKR1405
M3x14mm Button Head Screw
x4
TKR1463
M2.5x6mm Button Head Screw
x2
TKR1611
M4x8mm Set Screw
x2
TKR6523HD
TKR6540HD
TKR6547
TKR1463
TKR6544B
TKR6541HD
TKR6525B
TKR1405
TKR6544B
TKR6548
TKR6555
TKR1601
TKR6544B
TKR6544B
TKR1411
TKR6253B
TKR6544B
TKR1463
TKR1601
TKR6611 - 1.4mm
TKR6547
Note: Do not over-tighten.
Below options sold separately.
*TKR6611 - 1.0mm
*TKR6611 - 1.1mm
*TKR6611- 1.2mm
*TKR6611- 1.3mm
(Option)
Note: Refer to page
26 for setting droop.
x5
TKR1601
M3x4mm Set Screw
Note:
Screw these
set screws in
gently, until they
just touch the
sway bar, then
back o just
slightly so the
sway bar is free.
11
Wheelbase Shims
2mm
0mm
large 1mm
front
rear
small .5mm
Stock Position
(”A” Block)
Note: With center dot down
inserts, Arm Sweep = 0°
Stock Position
(”B” Block)
Note: With center dot down
inserts, Kick Up = 10°