User Manual

-Dati tecnici e caratteristiche soggetti a cambiamenti senza preavviso -Technische Daten und Eigenschaften mit Änderungen ohne Anzeige
-All the specifi cations are subject to change without notice - Données techniques et caracteristiques suiettes à des changements sans avis
90
SPEED - FASTER
ERROR MESSAGE DESCRIPTION POSSIBLE ROOT CAUSE USER SOLUTION
NOT USB
During the HACCP data down-
load, the USB memory stick
was not plugged in
USB memory stick not plug-
ged in, not functioning or not
detected
Plug in the USB memory stick. If the
problem persists, contact a qualifi ed
technician.
NO DATA
HACCP data not available
No cyle has been performed
or the data have been erased
Operate the machinery in order to
have the HACCP available
HIGH TEMPERATURE
The cell temperature is higher
that the set limits
Maximum condensation time
exceeded
Shutdown the machinery, turn it
on again and perform a defrosting
cycle. If the problem persists, con-
tact a qualifi ed technician.
LOW TEMPERATURE
The cell temperature is lower
that the set limits
The compressor operates
continuously without stopping
Shutdown the machinery, turn it on
again. If the problem persists, con-
tact a qualifi ed technician.
When calling for a qualifi ed technician, it is mandatory to provide the following informations:
Error message
Serial number of the machinery
To delete an alarm, place the machinery in STAND-BY mode