User Manual

-Dati tecnici e caratteristiche soggetti a cambiamenti senza preavviso -Technische Daten und Eigenschaften mit Änderungen ohne Anzeige
-All the specifi cations are subject to change without notice - Données techniques et caracteristiques suiettes à des changements sans avis
59
SPEED - FASTER
11- CLEANING
DO NOT USE WATER JETS EVEN PRESSURIZED OR STEAM.
CLEANING THE EXTERNAL MODULE
It must be performed with a damp cloth with a solution of water and bicarbonate, or other neutral cleaners,
dry with a soft cloth.
CLEANING THE DISPLAY: “GLASS”
It must be performed using a clean soft cloth (free from dust and slag), moistened with soap and water or water and al-
cohol at 10% max. Other cleaners or cloths not wetted or soiled, could ruin the material. Dry it with a clean soft cloth.
CLEANING THE INNER CELL
Remove the pans, grids and guides can be cleaned as the interior, clean with a damp cloth with a solution of water and
bicarbonate, or other neutral cleaners, dry with a soft cloth.
CLEANING OF THE FOOD PROBE
After each blast chiller cycle in which the core probe has been used, you must clean it with a damp sponge with a solution
of water and bicarbonate.
CLEANING THE CONDENSER (MAINTENANCE)
For a correct operation of the machinery it is necessary that the condenser is kept clean to allow free circulation of air.
This operation has to be done every 120 days at the most. It must be done with a soft bristle brush to remove all dust and
fl uffs that are deposited on the fi ns of the condenser.
It would be even better to use a vacuum cleaner to avoid the release in the environment of the removed dust.
In presence of greasy deposits, you may want to remove them using a brush dipped in alcohol.
12- MACHINERY DISPOSAL
The scrapping and the fi nal disposal of the machinery must be made following the regulations in force in the country of
installation, especially with regards to the refrigerant gas and the lubricating oil of the compressor.
Materials used in the construction of the machinery:
Stainless steel: Construction of the appliance
Plastic parts: Construction of various parts
Refrigerant gas: in the refrigerant circuit
Compressor oil: in the refrigerant circuit
Copper: electrical system and the cooling circuit.
Below are the information for the user for the correct handling of electric and electronic devices (WEEE) with reference
to the European Parlament and Council Directive 2002/95/CE of 27 January 2003 and to the the relevant national imple-
menting regulations:
- There is an obligation not to dispose WEEE devices as unsorted municipal waste and to have for such waste a separate
collection;
- For the disposal, you should use only public or private waste collection systems defi ned by the local legislation. It is pos-
sible to return to the distributor the equipment at the end of its working life only when buying a new equipment;
- This equipment may contain hazardous substances: the improper use or incorrect disposal may have negative effects
on human health and on the environment;
The symbol (crossed out waste bin) shown on the product and in the above picture indicates that the equipment has
been introduced onto the market after 13 August 2005 and must be disposed of separately;
- In the event of illegal disposal of electrical and electronic waste, the sanctions are specifi ed by the local regulations
regarding disposal.