User Manual

-Dati tecnici e caratteristiche soggetti a cambiamenti senza preavviso -Technische Daten und Eigenschaften mit Änderungen ohne Anzeige
-All the specifi cations are subject to change without notice - Données techniques et caracteristiques suiettes à des changements sans avis
55
SPEED - FASTER
5- RISK ANALYSIS
Hazards list:
- Electrical components
- Sharp parts
- Machinery handling
- Fans in motion
- Refrigerant gases
- Air Flow
- Non-potable water
- Food contamination
- Not accessible gas pipes
- Cold environments
Warnings related to the danger of electrical components. Risk of electric shock, burns, or fi re:
- Access to the electrical components must be performed only by qualifi ed technicians.
- Do not touch the machinery with damp or wet hands or feet.
- Do not operate the machinery when barefoot.
- Do not insert fi ngers, objects or tools through the louvers or vents.
- Do not pull the power cord.
- Do not wash the machine with water jets or steam.
- Before carrying out any maintenance or cleaning operation, disconnect the machinery from the main power supply by
turning off the main switch and unplugging the power cord.
- If the room where the machinery is located becomes fl ooded, contact an authorized service center for repair before
using the machinery again.
- If the machinery is not used, disconnect it from the main power supply.
Warnings related to general hazards. Risk of injury:
- Presence of sharp edges. For operations on the machinery use suitable protective gloves.
- The handling of the machinery must be safely performed with means and attention such as to prevent damage to people
and property.
- Presence of moving fans. Do not remove the protective grids.
- Read in the machinery identifi cation plate the type of refrigerant gas, it could be a fl ammable gases.
- In case of fl ammable gas leaks from the cooling system of the machinery, unplug the power cord, open the windows to
ventilate the room and call for service immediately.
- If the refrigerant gas leaks, do not touch or inhale the leaked gas.
- After the fi rst installation or any repair operations of the machinery, always check that there is no refrigeration gas leaka-
ge.
- Presence of air fl ows. Do not directly expose people to cold or warm air fl ows.
- Do not block the inlet or outlet of the air fl ow.
- Presence of non-potable water. Do not drink the water drained from the machine.
- To prevent the contamination of food, the latter must not come into direct contact with the machinery but placed in ap-
propriate containers.
- Presence of gas pipes with high or low temperatures. Before touching the pipes make sure what is their temperature.
Use suitable protective gloves.
- Presence of parts in plexyglass. Do not hit those parts.
- In case of noise, odors or smoke unusually coming from the machinery, unplug the power cord and contact your authori-
zed service center.
- Do not install the machinery in places directly exposed to sea air or under direct sunlight.