Submittal Sheet
Job __________________________
Designer ______________________
Contact _______________________
01/11
Accessories
Replaces: New
Product design, software and literature are Copyright © 2011 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
1 of 1
All specifications are subject to change without notice.
Printed in Canada. C 002 - 01/11.
tekmar Control Systems Ltd., Canada, tekmar Control Systems, Inc., U.S.A.
The 10K Temperature Simulator 002 is designed to be used to test any tekmar control using 10K thermistor sensors. This can be used
to troubleshoot controls in the field, or to set up a simulation on a workbench and model control behavior. The main use of this product
is to simulate control operation. There are 3 separate sensors that can be simulated using the rotary dials on the 002.
--------------------------
3 separate temperature dials to simulate up
to 3 sensors
Works with any tekmar control that uses
10K sensors
•
•
-----------------------------------------------------
10K Temperature
Simulator 002
Date
S/N
Do not apply power to any terminals
F
F
140
150
170
190
210
110
130
80
230
95
32
50
60
70
80
-10
130
-45
90
-40
40
55
65
70
75
32
130
27
85
45
Front View Side ViewCover O
4–3/4”
(121 mm)
2–7/8”
(73 mm)
1–7/16”
(37 mm)
4–3/4”
(121 mm)
Literature D002
Packaged weight 0.4 lb. (180 g)
Dimensions 4-3/4” H x 2-7/8” W x 1-7/16” D (121 x 73 x 37 mm)
Enclosure White PVC plastic with 24” wire, NEMA type 1
Sensor simulation NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892
Yellow 45 to 85°F (7 to 29°C) incremental
Blue -40 to 90°F (-40 to 32°C) incremental
Red 95 to 230°F (35 to 110°C) incremental
Warranty Limited 3 Year (See D002 for full warranty)
This simulator is designed to work ONLY with tekmar controls that use 10k sensors.