Service Manual

33 of 48 © 2015 680_D - 10/15
Toolbox Menu
Description Range Access
ERROR CODE
The current error code is displayed.
Conditions: Always available.
See Error Code
Section
User
Installer
ACCESS LEVEL
Select the access level of the control. This determines which menus and items are available
through the user interface.
Conditions:
Available when the DIP switch is set to Unlocked.
User or Installer
Default = Installer
User
Installer
TYPE 680
Product information.
Product 680
tektra #: 107001
SW: J1243B
SVN: 1054
Conditions:
Always available.
J1243B
Last letter indicates
software version
User
Installer
SCREEN BRIGHTNESS
Select the screen brightness.
Conditions:
Always available.
0 to 100%
Default = 75%
User
Installer
TEMPERATURE UNITS
Select Fahrenheit or Celsius temperature units.
Conditions:
Always available.
°F or °C
Default = °F
User
Installer
FLOW UNITS
Select the units for measuring flow rates. Options include US gallons per minute (GPM),
cubic meters per hour (m
3
/h) and liters per minute (LPM).
Conditions:
Available when Application Mode is not set to Electric.
GPM, m
3
/h, LPM
Default = GPM
User
Installer
ENERGY UNITS
Select the units for measuring energy. Options include therms (thm), gigajoules (GJ), mega
british thermal units (MBtu) and kilowatt-hours (kWh).
Conditions:
Available when Application Mode is not set to Electric.
thm, GJ, MBtu, or
kWh
Default = thm
User
Installer
PRESSURE UNITS
Select the units for measuring pressure. Options include pounds per square Inch (psi) or
kilopascals (kPa).
Conditions:
Available when Application Mode is not set to Electric.
psi or kPa
Default = psi
User
Installer
LOAD DEFAULTS
Select “Yes” to reload the factory defaults on the control.
Conditions: Always available.
No or Yes
User
Installer