Install Instructions

11 of 44 © 2020 654_D - 02/20
Access Levels and Access Level Lock
The control is shipped pre-programmed with common settings.
The control has an “ Installer ” access level that allows full
access to all settings and a “ User ” access level that restricts
the number of settings available. The control defaults to the
“ User ” access level after 12 hours of operation.
Notice: tekmarNet
®
system controls include a Global Lock that
locks all connected snow melting controls and thermostats. Set
the tekmarNet
®
system control to unlock to allow access level
adjustment on all connected devices.
To change to the “ Installer ” access level:
• In the Toolbox menu, locate Access
• Adjust the access level to “ Installer ” by pressing the up or down
button. This will permit setting changes to the control.
Programmable Settings
Press and hold the Home button for 3 seconds to enter the programming menus. The control returns to the last programming
menu previously used.
Select a Programming Menu -------------------- --------------------
• Touch “NEXT” to advance (clockwise in above illustration)
to the next menu.
• Touch “BACK” to go backwards (counterclockwise in above
illustration) through the menus.
• Touch “ENTER” to enter a menu.
Setting Items ------------------------------------ ------------------------------------
• Touch or arrow to adjust the setting if required.
• Touch “NEXT ITEM” to advance to the next item within the
menu.
• Touch “BACK ITEM” to go backwards to the previous item
within the menu.
• To return to the parent menu after changing a setting, press
and release the Home button.
• To return to the Home screen, press and release the Home
button twice or wait 30 seconds to automatically return to
the Home screen.
Press and
hold for 3
seconds to
access the
programming
menus.
Programming Menus