User Guide

© 2015 554_U - 02/15
11 of 12
A Watts Water Technologies Company
Monitor Menu
The monitor menu allows you to view the following temperatures and running hours :
Outdoor temperature highs and lows
Room temperature highs and lows
Floor temperature highs and lows (requires floor sensor to be installed)
Filter Hours = Number of hours since the air filter was last replaced
Heat W = Number of hours the heat relay is on
Cool Y = Number of hours the cooling relay is on
Fan = Number of hours the fan relay is on
To clear the temperature highs and lows or the running hours:
1. Touch the temperature or running hours.
2. Display will show “
”.
3. Touch Enter.
•
•
•
•
•
•
•
Toolbox Menu
This menu provides advanced-level information.
Access
Change the access level on the thermostat.
Status Info
Displays the current status of the thermostat including any overrides from the tekmarNet
®
system control. Toggles between “Status Info” and the current status.
System Normal = Thermostat is operating normally.
For all other thermostat status messages, please see the Installation & Operation
Manual 554_D.
Software Version and Type Number
Display the software “SW” and the “TYPE” number.
•
•