Install Instructions

37 of 44

A Watts Water Technologies Company

Recommendation on How to Use Scenes

-----------------------------

Deciding how to use scenes depends on the needs and lifestyle of the customer using

the building.

Multi-Tenant Apartments

Scenes should be disabled (None) in multi-tenant buildings where each occupant has

differing heating requirements.

Residential Homes

Some residential customers may not require scenes. In that case, scenes can be

disabled (None). Homeowners who wish to save on energy costs should consider using

the Away scene to save energy while they are away from their property (example, on

vacation or on holidays).

The use of the Guest scene is useful in residential applications where a number of spare

bedrooms are occupied infrequent. Each spare bedroom would be set up to operate

on the Guest scene. The remaining thermostats can be set up to operate on the None,

Away or All scene configuration. Normally, the spare bedrooms would operate at the

moon temperature settings. When guests arrive, scene 5 can be activated through

a User Switch or Gateway. The spare bedroom then operates at the temperature

settings or operates on a programmable schedule if a schedule has been set up. When

guests depart, the scene can be changed back to scene 1 and the spare bedrooms

resume operation at the temperature settings.

Commercial Buildings

Commercial buildings are typically in use on a predictable schedule and normally can

operate in scene 1. In order to accommodate staff working overtime or cleaning staff,

a 3-hour or 8-hour temporary override is available when installed in conjunction with

a User Switch or Gateway. In these cases, the thermostats should be set up to use

the All scene configuration. At the touch of a button, the whole building changes from

operating on a programmable schedule (typically at the temperature setting when

not occupied) to operating at the temperature settings for 3 hours (scene 6) or 8

hours (scene 8). After the timer counts down and expires, the scene changes back to

the previous scene.

Secondary Temperature Display

This thermostat can display the outdoor, floor, or room heating and cooling temperature

settings in the smaller number area at the top right of the screen. To toggle the item

currently displayed, touch the secondary temperature. Display of the floor or outdoor

temperature requires a connection to an outdoor or floor temperature sensor, or the

thermostat is connected to a tekmarNet

system that includes an outdoor sensor. The

reading of the outdoor sensor connected directly to the thermostat takes precedence

over any outdoor sensor reading available on the tekmarNet

system.

or or or