Install Instructions

© 2015 554_D - 02/15
25 of 44
A Watts Water Technologies Company
Setting Display
ADDRESS
The tekmarNet
®
address of this thermostat. To manually set
the address, use the up or down arrow buttons.
Access Level: Installer
Range: AUTO, 01 to 24,
b:01 to b:24, 1:01 to 1:24,
2:01 to 2:24, 3:01 to 3:24
Conditions: tekmarNet
®
2 or 4 detected. Default: AUTO
SOFTWARE AND TYPE VERSION
Displays the software version and the tekmar type number.
Access Level: Installer, User, Limited, Secure Range: 554
Conditions: Always available. Default: 554
DEVICE COUNT
Provides a count of all the tekmarNet
®
thermostats and
setpoint controls on the tekmarNet
®
system.
Access Level: Installer
Range: 1 to 24
Conditions: Must be connected to a tekmarNet
®
system.
Default: 1
OFFSET ROOM
Manual offset correction of the room temperature.
Access Level: Installer
Range: -5 to +5°F (-3.0 to
+3.0°C)
Conditions: Always available.
Default: 0°F (0.0°C)
FILTER CHANGE HOURS
Select the amount of time the fan operates before the air filter
requires maintenance.
Access Level: Installer
Range: OFF, 200 to 2000
hours
Conditions: Always available. Default: OFF
LOAD FACTORY DEFAULTS
Touch Enter to load the factory defaults settings.
Access Level: Installer Range: None
Conditions: Always available.
Default: Keep existing settings
ERROR HISTORY 1 THROUGH 5
Displays a history of the last 5 errors that have occurred on
the thermostat in the past 30 days. Touch Enter to manually
clear the error code.
Access Level: Installer
Range: See
Troubleshooting section
Conditions: An error must have occurred.
Default: Not applicable
Toolbox Menu (2 of 2)