Installation and Operation Manual

Setting Display

FLOOR MAXIMUM

Set the floor maximum temperature in order to

protect the floor covering.

Suggested settings:

Tile = 90°F (32°C)

Hardwood Floor = 85°F (29°C)

Access Level: Installer

Range: 40 to 122°F (4.5 to

50.0°C), OFF

Conditions: Sensor 1 or Sensor 2 set to Floor, and

either Room Sensor set to ON, or Room Sensor

set to OFF while Sensor 1 or 2 is set to Room, and

Schedules or Scenes are in use.

Default: 85°F (29.5°C)

TEMPORARY HOLD

Temperature adjustment in the home menu can

result in either permanent temperature setting

change or temporary temperature setting change

that lasts 3, 6, 9, 12 hours or until the next sched-

uled event.

Access Level: Installer Range: OFF or ON

Conditions: None Default: OFF

Set Temp Menu (3 of 3)

Time Menu (1 of 2)

Setting Display

MINUTE

Select the current time minutes.

Access Level: Installer, User Range: 00 to 59

Conditions: Schedule is used or Clock is set to ON. Default: 00

HOURS

Select the current time hours.

Access Level: Installer, User Range: 12 AM to 11 PM or 00 to 23

Conditions: Schedule is used or Clock is set to ON. Default: 12 AM

DAY OF WEEK

Select the current day of the week.

Access Level: Installer, User

Range: Sunday, Monday, Tuesday,

Wednesday, Thursday, Friday,

Saturday

Conditions: Schedule is used or Clock is set to ON. Default: Sunday