532_U 02/15 tekmarNet® Thermostat 532 Zoning Replaces: New User Manual A Watts Water Technologies Company 1 of 4 © 2015 532_U - 02/15
This brochure will provide you with the information you need to benefit the most from your tekmar thermostat. Please visit www.tekmarControls.com for more detailed information on this or any other tekmar product. The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer.
Setting The Temperature To change the heat temperature setting, push the or button to select a preferred temperature setting. The floor and air heating can be shut off by holding the button until Set Room is Off. To resume heating when the Mode is Off, press the button to navigate to the Mode setting, then press the button to select Mode Heat. The thermostat will resume heating at the last previously set temperature. The thermostat can operate on a programmable schedule.
Settings • Press and hold down both the and buttons for 3 seconds to change from one step to the next. • Release both buttons once the step has been reached. • Press the or the button to change the setting, if available. • Press and hold down both the and buttons for 3 seconds to go to the next step, OR • After 15 seconds of no button activity, the display returns to normal operation. MODE Select heat or off. SET ROOM Set the room temperature while in the occupied time period.