Install Instructions

ManualsBrandsTekmar ManualsHeating Supplies532 tekmarNet One Stage Heat Thermostat

14 of 20

A Watts Water Technologies Company

tekmarNet

Address

When connected to a tekmarNet

system, each thermostat will be automatically given an

address. The address is useful as a troubleshooting tool to locate thermostats with errors

and also allows room naming on a Gateway.

The address consists of the bus water temperature followed by the thermostat device

number. Available buses are b (boiler), 1, 2 and 3. Device numbers range from 01 to

24. If the thermostat is used without a tekmarNet

system control, the bus number is not

shown.

When using the thermostat together with a Gateway, it is important that each address be

manually set. This allows each thermostat to be named on the Gateway.

If two thermostats are manually set to the same address, an error message will appear.

The error remains until one of the addresses is manually changed to a vacant address

or to Auto.

It is highly recommended to keep a documented list of thermostat addresses. This is

extremely helpful when troubleshooting errors. The tekmarNet

system control will display

addresses of thermostats that have errors. Referring to the address documentation simplifies

the process to locate and correct errors.

Lock/Unlock And Access Levels

The thermostat can be either locked or unlocked. When locked, there are fewer settings

available in the Setup menu. There are two locations to lock the thermostat:

1) Locally on the back of the thermostat using the Lock switch

2) Globally on the tekmarNet

system control using the Lock switch or Access Level

set to User.

Both the local and global lock settings must be set to unlock before all thermostat

settings are available. Once installation is complete, it is recommended to lock the

thermostat.

Scene Display Room Temperature Setting

Follows the programmable schedule or

operates at the occupied temperature

Away

Away temperature

Unoccupied temperature

Scenes (System Override)

Scenes provide an easy way to save energy while away on vacation, or override a

pre-set schedule when plans change. tekmarNet

devices such as a User Switch 479

provide scene adjustment.

This thermostat responds to the following scenes:

While in the Away scene, the room temperature cannot be changed using

the

button

. Change the scene from Away to or to change the temperature.