User Guide

D - 02/18

3 of 8

Radio Frequency Interference

Read Manual and all product labels BEFORE using the

equipment. Do not use unless you know the safe and proper

operation of this equipment. Keep this Manual available

for easy access by all users. Replacement Manuals are

available at tekmarControls.com

•

It is the installer's responsibility to ensure that this control is safely installed accord-

ing to all applicable codes and standards.

•

Improper installation and operation of this control could result in damage to the

equipment and possibly even personal injury or death.

•

This control is not intended for use as a primary limit control. Other controls that

are intended and certified as safety limits must be placed into the control circuit.

The control includes a fuse and transformer that are serviceable. Do not attempt to

service any other parts of the control. Attempting to service the control voids the warranty.

• Strip all wiring to a length of 3/8 in. or 10 mm for all terminals.

• A circuit breaker or power disconnect that provides power to the control should

be located nearby and clearly labeled.

•

Refer to the current and voltage ratings at the back of this manual before

connecting devices to this control.

The installer must ensure that this control and its wiring are isolated and/or shielded

from strong sources of electromagnetic noise. Conversely, this Class B digital apparatus

complies with Part 15 of the FCC Rules and meets all requirements of the Canadian

Interference-Causing Equipment Regulations. However, if this control does cause

harmful interference to radio or television reception, which is determined by turning

the control off and on, the user is encouraged to try to correct the interference by re-

orientating or relocating the receiving antenna, relocating the receiver with respect to

this control, and/or connecting the control to a different circuit from that to which the

receiver is connected.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement

sur le matériel brouilleur du Canada.