Application Brochure

ManualsBrandsTekmar ManualsHeating SuppliesMixing Setpoint Control - Floating Action

Note: This is only a concept drawing. The designer must determine whether this application will work in his system and must ensure compliance with

code requirements. Necessary auxiliary equipment, isolation relays (for loads greater than the speciﬁed tekmar internal relay ratings), and other safety

and limit devices must be added.

- Application

Electrical

Mechanical

A 153-1

12/08

Mixing Setpoint Control 153

120 V (ac)

Class 2

Transformer 24 V (ac)

120 V (ac)

153

4 5678

Power

Com

Sen

Sup

Sen

Ret

Sen

Pwr

Mix

Opn

Mix

Cls

Mix

10A 10A

C-

R+

M1 = Actuating Motor 741-24V (ac) Floating Action

P1 = Heating Load Pump

S1 = Mix Supply Sensor 071

S2 = Boiler Return Sensor 071

V1 = 3-way Mixing Valve 710 - 714

P2 = System Pump

Additional

zones

153

Class 2

Transformer

24 V (ac)

SW2

SW1

SW1 = Heating Pump Control Switch

SW2 = Boiler Control Switch

123

No Power

SW2

Boiler

SW1

Summary of content (6 pages)

PAGE 1
- Application A 153-1 12/08 Mixing Setpoint Control 153 Mechanical 153 Class 2 Transformer 24 V (ac) 120 V (ac) SW2 SW1 S1 P1 V1 Additional zones P2 S2 Electrical M1 P1 P2 S1 S2 SW1 SW2 V1 10A = Actuating Motor 741-24V (ac) Floating Action = Heating Load Pump = System Pump = Mix Supply Sensor 071 = Boiler Return Sensor 071 = Heating Pump Control Switch = Boiler Control Switch = 3-way Mixing Valve 710 - 714 10A 153 No Power 1 2 3 4 5 6 7 8 Power Pwr Opn C- R+ Mix Mix Cls Com Sup Ret Mix
PAGE 2
A 153-1 Technical Data Mixing Setpoint Control 153 Floating — — — — — — — — — — — — — — — — A 153's, D 153, D 001, D 070 Microprocessor control; This is not a safety (limit) control. 0.66 lb. (300 g), Enclosure C, PVC plastic 4-3/4” H x 2-7/8” W x 7/8” D (120 x 74 x 22 mm) CSA C US, CSA 22.2 No 24 and UL 873, meets class B: ICES & FCC Part 15 Indoor use only, -20 to 120°F (-30 to 50°C), < 90% RH non-condensing. 24 V (ac) ±10%, 50/60 Hz, 3 VA or 24 V (dc) ± 10%, 0.
PAGE 3
- Application A 153-2 12/08 Mixing Setpoint Control 153 Mechanical 153 Class 2 Transformer 24 V (ac) 120 V (ac) Heat Pump Unit Zone 1 Heat Pump Unit Zone 2 Heat Pump Unit Zone 3 Actuating Motor M Max.
PAGE 4
A 153-2 Technical Data Mixing Setpoint Control 153 Floating — — — — — — — — — — — — — — — — A 153's, D 153, D 001, D 070 Microprocessor control; This is not a safety (limit) control. 0.66 lb. (300 g), Enclosure C, PVC plastic 4-3/4” H x 2-7/8” W x 7/8” D (120 x 74 x 22 mm) CSA C US, CSA 22.2 No 24 and UL 873, meets class B: ICES & FCC Part 15 Indoor use only, -20 to 120°F (-30 to 50°C), < 90% RH non-condensing. 24 V (ac) ±10%, 50/60 Hz, 3 VA or 24 V (dc) ± 10%, 0.
PAGE 5
- Application A 153-3 12/08 Mixing Setpoint Control 153 Mechanical 153 Class 2 Transformer 24 V (ac) 120 V (ac) Supply Sensor (S1) 071 C1 M P1 P2 V1 Boiler Return Sensor (S2) 071 Electrical 10A 10A 153 No Power C1 = Actuating Motor P1 = Boiler Pump P2 = System Pump S1 = Supply Sensor 071 S2 = Boiler Return Sensor 071 V1 = 4-Way Mixing Valve 1 2 3 4 Power Pwr Opn C- R+ Mix Mix 5 6 7 8 Cls Com Sup Ret Mix Sen Sen Sen S1 S2 1 2 3 Com Opn Cls C C1 Class 2 Transformer 24 V (ac) C 120 V (ac
PAGE 6
A 153-3 Technical Data Mixing Setpoint Control 153 Floating — — — — — — — — — — — — — — — — A 153's, D 153, D 001, D 070 Microprocessor control; This is not a safety (limit) control. 0.66 lb. (300 g), Enclosure C, PVC plastic 4-3/4” H x 2-7/8” W x 7/8” D (120 x 74 x 22 mm) CSA C US, CSA 22.2 No 24 and UL 873, meets class B: ICES & FCC Part 15 Indoor use only, -20 to 120°F (-30 to 50°C), < 90% RH non-condensing. 24 V (ac) ±10%, 50/60 Hz, 3 VA or 24 V (dc) ± 10%, 0.