Install Instructions

2 of 4
© 2018 tekmar 014_D - 10/18
If a gang box is used:
• Feed the wiring through the hole in the
wall trim plate and the thermostat base.
• Fasten the thermostat base and wall
trim plate to the gang box.
• Terminate wiring to the wiring strip.
• Push the thermostat front onto the
thermostat base.
If mounting directly to the wall:
• Drill holes and install the wall anchors.
• Feed the wiring through the large hole
in the wall trim plate.
• Using wood screws, fasten the thermostat
base and the wall trim plate to the wall
by driving the screws into the wall
anchors.
• Terminate wiring to the wiring strip.
• Push the thermostat front onto the
thermostat base.
Mounting The Thermostat