Install Instructions

ManualsBrandsTekmar ManualsHeating SuppliesAdaptor Plate - for Enclosure S

Adaptor Plate 012

Installation & Operation Manual

012

03/13

Accessories

Replaces: New

012_D - 03/13

1 of 4

A Watts Water Technologies Company

The Adaptor Plate 012 covers the paint

ring left behind when replacing other

thermostats, so that no patching or painting

the wall is required. The 012 also allows

a thermostat to be installed onto a single

gang electrical box. The 012 package

includes screws for mounting the adaptor

plate and the device that attaches to it.

Introduction

Features

Covers the paint ring left when

replacing common round

thermostats

Compatible with the following

tekmar products:

518, 519

•

Summary of content (4 pages)

PAGE 1
012_D 03/13 Adaptor Plate 012 Accessories Replaces: New Installation & Operation Manual Introduction The Adaptor Plate 012 covers the paint ring left behind when replacing other thermostats, so that no patching or painting the wall is required. The 012 also allows a thermostat to be installed onto a single gang electrical box. The 012 package includes screws for mounting the adaptor plate and the device that attaches to it.
PAGE 2
Mounting The Thermostat Stud Adapter Plate 012 Thermostat Front Thermostat Base 3 1/4” (83 mm) Gang Box If a gang box is used: • Feed the wiring through the hole in the adaptor plate and the thermostat base. • Fasten the adaptor plate to the gang box. • Fasten the base of the thermostat to the adaptor plate. • Terminate wiring to the wiring strip. • Push the thermostat front onto the thermostat base.
PAGE 3
Adapter Plate 012 Thermostat Front Thermostat Base Wall If mounting directly to the wall: • Drill holes and install the wall anchors. • Feed the wiring through the large hole in the adaptor plate. • Using the 1” wood screws, fasten the adaptor plate to the wall by driving the screws into the wall anchors. • Using the 1/4” self tapping screws, fasten the thermostat base to the adaptor plate. • Terminate wiring to the wiring strip. • Push the thermostat front onto the thermostat base.
PAGE 4
Limited Warranty and Product Return Procedure Limited Warranty The liability of tekmar under this warranty is limited. The Purchaser, by taking receipt of any tekmar product (“Product”), acknowledges the terms of the Limited Warranty in effect at the time of such Product sale and acknowledges that it has read and understands same.