Manualshelf

User guide

ManualsBrandsTEKLYNX ManualsSoftwareCodesoft 9.1 Enterprise, RFID, LTP Key, UPG + 1Y SMA, ML
11121314151617181920
User Guide
USB hard
ware keys are not supported using Windows 95 and Windows NT4 operating systems.
Error messages when launching the software
If you are prompted with an error message when launching the software, please check the following items:
The administrative rights. You must have local administrative rights on your PC so that the key
installation works properly. If you do not have them, you will receive an error message when launching
the software. You will have to manually install the drivers.
Drivers installation. If you had trouble during installation or if you receive an error message when
launching the software, you will have to manually install the drivers.
The key: Check that the connected key works with your labeling software.
Driver update: Your driver may not be updated. To update it, you have to download it from
http://www.aladdin.com/support/hasp/enduser.aspx
Software key protection
Once you have installed the labeling software, the Activation Wizard will be launched, taking you through the
software key protection process.
To activate the software key:
In the Activation wizard, select Activate and click Next. There are three possible activation methods:
Automatic (Internet), Telephone/Website, and Fax.
Automatic activation method (recommanded)
1. Select Automatic from the list of activation modes. This option allows the activation of the software
key via a secure Internet connection. This is the quickest and easiest option available.
2. Input your information in the User Registration form. Remember that all fields marked by an asterisk
(*) are required. Click OK.
3. Enter the activation code provided with the product and click Next.
4. Click Finish if your activation results are successful. If any problems were encountered, a message will
inform you that the activation has failed and an error will be displayed.
Telephone/Website activation method
1. Select the Telephone activation method.
2. Enter the activation code provided with the product and click Next.
3. Call your reseller.
Note: You will be required to fill out a User Registration via the phone. Please have your company
information on hand.
4. Enter the Response Code provided to you by your reseller and click Next.
5. Click Finish if your activation results are successful. If any problems were encountered, a message will
inform you that the activation has failed and an error will be displayed.