User's Instructions
8
If COUNTY/CTCSS button is pressed, your
radio will enter county code that represents the
location from where you select to receive
warning and LCD displays:
You have altogether ten* locations to select, all county warnings [ALL] or warning from
nine specified local locations [------], which can be selected in sequence by momentary
press of COUNTY/CTCSS key.
The programmed county code can be deactivated and re-activated by UP or DOWN key
(county 0 has a special selection of all warnings [ALL] that was set originally. LCD
displays:
or
NOTE:
If one of 1 to 9* [------] (specific local locations) is selected, its local county code needs to be
programmed into your unit.
You can toggle different location selections by press COUNTY/CTCSS button showed as
following.
Once you get your desired selection, you can enter the county code setting mode of this
selection by press and hold COUNTY/CTCSS button for 2 seconds. The extreme left
county-code digit will flash.
Use UP or DOWN button to select the desired digit and press COUNTY/CTCSS button to
confirm and then advance to the following digit.
REMEMBER:
Some counties has more than one transmission station and are subdivided into several
COUNTY/CTCSSCOUNTY/CTCSSCOUNTY/CTCSSCOUNTY/CTCSS
Entering Appropriate County
Cd