User's Instructions
7
Quiet Code Setting
Press and hold COUNTY/CTCSS button for about 1.5 seconds during normal operation to
enter the quiet code setting mode and the quiet code on LCD flashes. Press continually
the UP or DOWN button to select the desired quiet code. Once more press
COUNTY/CTCSS button to confirm and then exit.
Other Settings of FRS Radio
When the last mode before you turned off your radio was FRS mode, hold down
COUNTY/CTCSS button and power the radio by pressing POWER/VOL button to enter into
the setting mode. Repeatedly pressing COUNTY/CTCSS button can toggle among the
settings of KEY BEEP, C-TONE and AUTO POWER for editing. Furthermore, you can
make the desired selection with UP or DOWN button. Pressing MENU/KEYLOCK button or
no button operation for 10 seconds will store the setting and exit automatically the setting
mode. The following is the detailed flow:
Press MENU/KEYLOCK button or no button operation for 10 seconds will exit automatically the
setting mode.
Note: *
You can only communicate with another radio that is using the same channel and/or the same quiet
code as your radio.
*
The key beep function does not have effect on
PTT
and
MONI/FUNC/NOAA
buttons.
NOAA RECEIVER
Press MENU/KEYLOCK button to enter NOAA
mode, and LCD displays:
“
Auto power Off”
COUNTY/QUIET
“
Key Beep”
”C-Tone”
COUNTY/QUIET
COUNTY/QUIET