User's Instructions
5
1
1
0
0
.
.
Battery Compartment
C. FUNCTION AND OPERATION OF THE FRS RADIO
Preparation
Your radio uses four AAA batteries for power supply. We recommend alkaline batteries.
However, you can use rechargeable batteries in the radio.
To start using your radio, insert four AAA batteries into the battery compartment, noting
the polarities.
As soon as you connect the power, the unit will enter the clock mode and the cleared time
will display on LCD.
Note:
Once your batteries are used up, you should replace all the four alkaline batteries with new
ones. Then the clock will be cleared to zero, so you should re-adjust the clock.
Turning On/Off Your FRS Radio
Press and hold POWER/VOL button for about 2 seconds. An audible tone will sound to
indicate your FRS radio is on. (The unit will return to the last state before it was shut off)
Then same operation will make your unit exit the FRS radio to clock mode.
Illuminating the Display
Press any button except PTT to illuminate the display for seven seconds during FRS radio
being on.
Adjusting Volume
When your radio is turned on, momentarily press POWER/VOL button to enter into the
volume-adjusting mode. Repeatedly press UP or DOWN button to adjust volume until you
get a comfortable level. Once more momentary press on
POWER/VOL button or no button
operation for 5 seconds will make the radio exit this mode.
Key Locking
You can lock your radio setting to avoid accidental pressing of keys by activating the keypad lock.
Press and hold MENU/KEYLOCK button for more than 2 seconds to activate or deactivate the
keypad lock. The function is effective to all keys except the PTT key and 2 second-press of the .
MONI/FUNC/NOAA
button for monitor function as well as the POWER/VOL key for turning
off the radio.
Setting VOX
Pressing UP key while holding MONI/FUNC/NOAA
button
can toggle between VOX on/off.
If the UP
key is held down for more than 1.5 seconds, the unit will enter the mode of
toggle between high and low levels of VOX control sensitivity.