User's Manual

Page 29 Page 30
2 Monitor the working channel for an announcement from the
calling vessel.
6 SETUP MENU
6.1 MENU FUNCTION DESCRIPTION
The radio’s setup functions are accessed through the Menu mode.
Menu mode selections are as follows.
Item Description
BUDDY LIST Selects the Buddy List Entry routine to enter Names and
MMSID's for frequently called DSC stations. Up to 20 names
could be stored.
LOCAL/DST distant allows normal receive sensitivity, local eliminates
receiver noise, but degrades receiver sensitivity. The LOCAL
icon is displayed in LCD.
BACKLIGHT Set the backlight level, total 8 levels be available.
CONTRAST Selects display contrast setting: 1-8 levels.
GPS/TIME Set the Position info if no GPS attached and define the display
POS and Time format, Offset and COG/SOG display settings.
RADIO SETUP There are 4 items that user can customize – CH Name, Ring
Tone Volume, Beep Volume and Internal Speaker on/off.
DSC SETUP There are 5 functions that allow user to alter – User MMSID
entry, Group MMSID entry, Individual Reply, DSC enable, and
POS reply
RESET Recall ex-factory setting
6.2 Set-Up Menu Navigation
To access the Menu Mode:
Press and hold MENU/DSC key, Text area displays the Set-Up Menu
list.
To exit the Menu mode or sub –mode:
Press the 16/9 or CANCEL key or else select the EXIT option from the
menu.
Rotate the CH knob to select the Item within the Set-Up Menu list
To confirm a selected item for adjustment, push the CH knob.
When the desired setting is done, press the CH knob to enter the
setting, and move back to the Main Menu list.
Set Up operation is exited by turning the unit off. All changes are saved
in EEPROM (exception Manual Enter GPS Date)
During Set-Up operation, TX and RX are disabled.
6.3 Buddy List
The Buddy List can store up to 20 entries with Name and MMSID#. User
can add, edit or delete the record from the list under this submenu.
6.3.1 Adding an Entry
1 Select Buddy List and the cursor is at <NEW> press CH knob
entry page which prompt up to allow enter Name and MMSID.
2 Rotate the CH knob to select the first desired character (A-Z, 1-9,
Space and Back Arrow "<") for the name. When the desired
character is shown, push the CH knob to enter, the next
characters select all the same, the characters can be up to 12.
When the last digit is entered, the activation advances to the first
MMSI digit.
3 Enter the MMSID associated with that buddy name (this must be
numeric) Prefix 00 will treat as Coast Once 9 digit be entered,
pops up a new page to ask for confirmation to save.
4 Press the CH knob to save the new entry, which is displayed at
the top of your BUDDY LIST.
5 Press CANCEL will terminate the process without saving go back
to Buddy list page.
6 When the buddy list is full. you cannot make a new entry until you
have delectd an existing entry.
6.3.2 Edit Existing Entry
1 Pick up one from BUDDY list and edit Press CH knob one
Page pops up item for you to edit or delete, Choose EDIT.
2 when you are finished editing. Press CH knob into a new page
prompt in to ask for confirmation to save.
3 Press the CH knob to save the new edit. The BUDDY list is
displayed again. If more changes are required repeat
steps1thru 3 otherwise, press cancel to exit.
6.3.3 Delete an entry
1 Select the one’s which you want to delete from the list.
2 rotate the CH knob to select the delete option.
3 press and hold the he CH knob to confirm the delete action.
4 the selected record will be removed and go back to BUDDY list
page. You can repeat steps from 1to 4 to delete more records,
or press cancel to exit.