User's Manual

Page 35 Page 36
The characters available in the digit string are 0-9 AND "<" (back arrow).
Selecting the "<" and pushing the Channel/Select knob selects the previous
character in the MMSI for editing.
From the Confirmation Menu, rotate the channel-selecting knob to select “SAVE”
(default selection) and press Channel/Select to permanently save the Name and
MMSI. Select “EXIT” and press Channel/Select knob to discard the information
and return to the Set-Up Main Menu.
6.6 DELETE BUDDY LIST
Follow this procedure to delete entries from the Buddy List.
1. Press and hold DSC key to display the Set Up Main Menu.
2. Rotate the Channel/Select knob to select “RESET”. Press the
Channel/Select knob to enter “RESET” for adjustment.
The display reconfigures to show the Reset Menu entry screen.
1. Rotate the Channel/Select knob to select “BUDDY LIST”. Press the
Channel/Select knob to enter.
The display reconfigures to show the Buddy List.
2. From the Buddy List, rotate Channel/Select knob to select the name to
remove. Press Channel/Select to enter.
The Confirmation Menu appears.
3. From the Confirmation Menu, select “YES” and push Channel/Select to
delete the name and return to the Set-Up Main Menu. Select “NO” to abort
operation and return to the Set-Up Main Menu.
6.7 POSITION
1. Pres s and hold DSC key to display the Set Up menu.
2. Rotate the Channel/Select knob to select “POSITION”. Press the
Channel/Select knob to display the position menu.
3. Rotate the Channel/Select knob to select the first character (N. S.). When
the desired character is shown, press the Channel/Select knob to enter and
subsequently activate the digit string (0 – 9) and press the Channel/Select
knob to select the digit. When the desire digit is shown, push the
Channel/Select knob to enter.
4. When the last digit of latitude and the longitude is entered, return to the set-
up menu.
J Note: The function is valid only when your radio are NOT connected to a GPS
receiver.