User's Manual

Page 31 Page 32
SET-UP MENU
6.1 DESCRIPTION
A series of set up selections are available in a special mode accessed at start-up.
To enter SET UP operation, press and hold DSC key for greater than 1 second at
any time to abort the current function. The Text area displays the Set-Up Menu
list.
6.1.1 SET -UP MENU NA VIGATION
Items within the Set-Up Menu list are selected by rotating the Channel/Select
knob. To confirm a selected item for adjustment, push the Channel/Select knob.
The display reconfigures allowing the item to be adjusted with Channel/Select
knob. When the desired setting is achieved, press the Channel/Select knob to
enter the setting, and move back to the Main Menu list. Set Up operation is
exited by turning the unit off. All changes are remembered in EEPROM.
During Set-Up operation, no other radio features are available. TX and RX are
disabled.
6.1.2 SET UP FUNCTIO NS AND RANGE OF ADJUSTMENT
Items in the SET-UP Menu are as follows and appear in this sequence.
GPS Alarm selects either “ENABLED” or “DISABLED”. When
set to “ENABLED”, the radio alarms when no
navigation data is received; when set to
“DISABLED”, the radio does not alarm even if no
navigation data is received.
Call Log Provides access to calls stored.
Backlight Selects the display backlight setting either HIGH,
LOW or OFF setting. Note the display backlight is
always on, unless set to OFF with this function.
Buddy List Selects the Buddy List Entry routine to enter Names
and MMSI's for frequently called DSC stations.
Position Selects the position setting to enter longitude and
latitude.
UTC Time Selects the UTC time to enter the time.
Contrast Selects display contrast setting: 1-4 levels.
Key Beep Selects key beep volume, either HIGH or LOW.
Time Offset Selects Time offset to correct UTM to local time.
Setting range is -13 to +13. (New Zealand Daylight
Savings Time requires a 13 hours offset.)
User MMSI Selects the User MMSI Entry routine to enter the
radio's user name and MMSI.
GROUP MMSI Selects the Group MMSI Entry routine to enter the
group’s name and MMSI.
Reset Select options to reset radio to factory settings.
Select “SETTINGS” to return all user settings (Not
User MMSI and Buddy List) to factory settings.
Select Buddy List to Erase individual selections
within the Buddy List.
6.2 GPS ALARM ADJUSTMENT
1. Press and hold the DSC key to display the Set Up menu.
2. Push the Channel/Select knob to display the GPS Alarm Mode Adjustment
menu.
3. Select “ENABLE” and push the Channel/Select knob to enable the GPS
alarm function and return to the Set Up Main Menu Select “DISABLE” and
press the Channel/Select knob to disable the function and return to the Set
Up Main Menu.