User's Manual

10
11. Menu Setting
In Menu mode operation, you can set Key Beep, Vibrator, VOX, APO, C-Tone and Hi/Lo
Power features for your radio.
11.1. Key Beep
• The radio will generate key beep if any key is pressed (except PTT & Function key).
• The factory default setting is ON.
11.2. Vibrator
• If the radio is idle (no Tx and Rx) for 30 seconds, the radio will vibrate for 2 seconds when
receiving signal.
• The factory default setting is ON.
11.3. VOX
• After power on, the radio will automatically turn on VOX (Voice Activated Transmission)
function and be set to Level 4 if a VOX headset has been plugged-in, the radio is still set to
Level 4 even if VOX function is off before power on.
• VOX operation can be temporarily disabled (VOX icon not flashes) by pressing PTT. To
re-enable VOX mode, short press the PTT (VOX icon flash) or enter menu mode (with save
menu setting).
• Select VOX sensitivity Level 1, 2, 3 or 4 in Menu mode:
4 = High Sensitivity,
LO
VOX
APO
VOX VOX
APO
APO
APO
LO
VOX VOX