Operation Manual

4
GB
Safety tips
The following tips avoid damage to the
appliance:
• Do not switch on the appliance without the
rotating base and respective plate.
• Do not switch on the appliance when it is
empty. This may result in overload, if there is
no food inside.
• Only use microwave-safe dishes.
• Do not keep any inflammable object inside the
oven, because it may go on fire when the
oven is switched on.
• Eggs with shells and whole boiled eggs
should not be heated in microwave ovens
because they may explode.
• Do not heat pure alcohol or alcoholic drinks in
the microwave.
THIS IS A FIRE HAZARD.
• Warning: do not heat liquids or other foods in
closed containers, because they could easily
explode.
Be careful when heating liquids!
• When heating liquids (water, coffee, tea, milk,
etc.), they may almost reach boiling point
inside the appliance and if they are removed
suddenly, may fly out of the container. This
may cause injuries and burns!
• In order to avoid this type of situations, put a
plastic spoon or glass rod in the container
when heating liquids.
Be careful!
• When heating small amounts of food, it is
very important not to select long periods of
time or very high power levels, because the
food may overheat or burn. For example,
bread may burn after 3 minutes if a very high
power level is selected.
• To toast, only use the grill function and
supervise the oven at all times. If you are
using the combined function (microwave and
grill) to toast, the bread will go on fire in a very
short period of time.
• Always heat baby food in jars or bottles
without lids or teats. After heating the food,
shake or stir it well to ensure that the heat is
uniformly distributed. Check the temperature
of the food before giving it to the child,
Burning hazard!
In case of repair:
• ¡Warning – Microwaves! The outer
protection should not be removed. Any
repair or maintenance carried out by persons
that have not been authorised by the
manufacturer is dangerous.
• Warning: The light bulb may only be replaced
by the Technical Support Service.
• If the power cable is damaged, only the
Technical Support Service may replace it with
one of the same characteristics, in order to
avoid damage.
• Repairs and maintenance, especially of
charged parts, may only be carried out by
technicians that have been authorised by the
manufacturer.