User Manual

Sinks Collection201706 07www.teka-appliances.com.auTek a
Classic Single Bowl Sink
LHB: TCLA10BRHD
RHB: TCLA10BLHD
W × H (mm): 860 × 500
Bowl size (mm): 340 × 400 × 180
Base Cabinet Width: > 50cm
Installation: Inset
Material: 304 grade SS, 0.8mm thickness
Inset (Drop In)
Kitchen sinks were traditionally
‘drop-in’ style, that is, with
the rim of the sink sitting on
the work surface. Tea drop-
in sinks can be mounted on
virtually any worktop using Tea
clip-and-bolt fasteners, which
adjust to the thickness of the
surface for a tight, non-slip
fit. The sink is fastened to the
worktop from underneath, with
no screws or bolts show. The
drop-in design has a small rim
to stop water spilling onto the
work surface.
Inset Sins
Inset Sinks
Classic 1 + 1/2 Bowl Sink
LHB: TCLA15BRHD
RHB: TCLA15BLHD
W × H (mm): 1000 × 500
Bowl size (mm): 406 × 406 × 193, 185 × 225 × 138
Base Cabinet Width: > 70cm
Installation: Inset
Material: 304 grade SS, 0.8mm thickness
Classic 1 + 3/4 Bowl Sink
LHB: TCLA20BMAXRHD
RHB: TCLA20BMAXLHD
W × H (mm): 1160 × 500
Bowl size (mm): 450 × 400 × 200, 280 × 400 × 190
Base Cabinet Width: > 80cm
Installation: Inset
Material: 304 grade SS, 0.8mm thickness
Classic Double Bowl Sink
LHB: TCLA20BRHD
RHB: TCLA20BLHD
W × H (mm): 1160 × 500
Bowl size (mm): 406 × 406 × 190mm
Base Cabinet Width: > 80cm
Installation: Inset
Material: 304 grade SS, 0.8mm thickness
Classic Single (Max) Bowl Sink
LHB: TCLA10BMAXRHD
RHB: TCLA10BMAXLHD
W × H (mm): 860 × 500
Bowl size (mm): 450 × 400 × 200
Base Cabinet Width: > 50cm
Installation: Inset
Material: 304 grade SS, 1.0mm bowl/0.8mm top thickness