Mouse Editor Software User Manual Model: TM
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Hardware Installation · Plug into any USB Port on your computer · Install the Software. The software is required for advanced mouse features Software Installation (Note: The software is applicable to Windows XP/ Vista/ 7)To remove the driver, follow the steps: From START Æ PROGRAM Æ“Mouse” Æ Mouse Editor Æ “Uninstall Mouse Editor” Configure Functions Step 1: Open the "Mouse Editor Main Menu" by double clicking " " icon on the taskbar.
16-in-1 Mouse Gesture 16 preset functions are integrated in any one of mouse button except Scroll Up,Scroll Down and DPI Setting button. On the button definition area of Main menu, click the “ ” , you will see the “Gesture 16-in-1” on the function listing as shown on the right. Select “Gesture 16-in-1 Setting” from the listing; the setup screen will pop up as shown on the right. The “Gesture 16-in-1” offers customizable 16 functions in 1 click with gesture button.
a. Start: Press the "Gesture Button" b. Track of the drawing line: Draw the line as the c. End: Release "Gesture Button" Then the picture has been zoomed in. Example 2 See the contrast in EXCEL after drawing the line. Now let's take " 1. Select " 2. Click " " as example to show you how to use these functions： " icon to represent "Zoom In" as shown: " to close the setup screen. 3. Click “ ” to save to receiver’s memory. 4. Draw the line in Excel.
Execute Program One click to open a program file or a document. You may setup any of the mouse buttons “Execute Program” function. 2, 3, 4, 5, 7, wheel up(UP) and wheel down(DN) with the Usage: 1). Select the “Execute Program” from the pull-down button menu shown in Figure 1 2). A screen of file listings will pop up shown in Figure 2. 3) Select one of the files that you would like to open with the associated button and click “Open”.
Set Function Reminders for Each Mouse Button DPI Setting The mouse provides DPI shift capability with color indication. You can set-up your own sensitivity levels (DPI) within the software. There are two ways to change the mouse’s DPI mode to obtain suitable mouse moving speed: 1. By default setting, just press the "DPI Setting Button" with the color indicator on the mouse to change the DPI among 400-800-1,200-1,600-2,000 and 3,600 DPI.
Setting the Mouse’s Report Rate Note: The mouse offers 4 selectable report rates: 125/250/500/1,000Hz, which can be preset to use with a variety of office, drawing and gaming applications. The default is fixed at only 125Hz. Adjust the mouse's report rate by right-clicking the " and select " Report Rate Setting". " icon at the bottom right corner of your system tray You can select some preset Macro flies to upgrade your mouse for games by clicking " " "Mouse Editor Main Menu".
