User's Manual
Table Of Contents
- Overview
- Introduction
- Hardware Architecture
- User Interface Configuration
- Basic Configuration
- LAN Interface Settings
- WLAN Configuration
- WAN Configuration
- Services
- VoIP
- Advance
- Admin
- Statistics
98
TJ2100N-14ET User Manual
Select or enter the values by referring to Password parameters and click on Apply
Changes.
Table 47: Password parameters
Parameter
Description
UserName
Select the desired user name from the drop down menu.
Old Password
Enter current password in the text box.
New Password
Enter the desired password in the text box provided.
Confirmed Password
Re-enter password to confirm the password.
To revert to default values on the page, click Reset button.
Firmware Upgrade
Go to Admin-> Firmware Upgrade in the navigation pane. Firmware Upgrade page
is displayed. This page allows you to upgrade the firmware to the newer version. Please
note that do not power off the device during the upload because this make the system
unbootable. Click on Browse button, locate and open the required firmware file from the
local system. Click on Upgrade button. To revert to default values on the page, click
Reset button.
Figure 63: Password Configuration