User's Manual
Table Of Contents
- Overview
- Introduction
- Hardware Architecture
- User Interface Configuration
- Basic Configuration
- LAN Interface Settings
- WLAN Configuration
- WAN Configuration
- Services
- VoIP
- Advance
- Admin
- Statistics
88
TJ2100N-14ET User Manual
IPv6 Routing
Go to IPv6-> IPv6 Routing in the navigation pane. IPv6 Static Routing
Configuration page is displayed. This page is used to configure the IPv6 static routing
information. Here you can add or delete static IP routes.
Table 41: IPv6 Routing parameters
Parameter
Description
Enable
Allows you to enable or disable IPv6 routing by selecting the desired radio
button.
Destination
Enter the destination address in the text box provided.
Next Hop
Enter the next hop address in the text box provided.
Metric
Enter the metric in the text box provided.
Interface
Select the interface from the drop down menu.
To delete all configured interfaces on the pane, click on Delete All button. Check box
against interfaces on the page will get selected and will be deleted.
To delete desired interfaces on the pane, click on Delete Selected button and select the
check box against the interface desired to be deleted.
Figure 55: IPv6 Routing