User's Manual

60
TJ2100N-14ET User Manual
Table 28: IP/Port Filtering parameters
Parameter
Description
Outgoing Default
Action
Allows you to 'Deny' or 'Allow' outgoing default action by selecting the
desired radio button.
Incoming Default
Action
Allows you to 'Deny' or 'Allow' incoming default action by selecting
the desired radio button.
Direction
Select the direction of the port from the drop down menu.
 Outgoing
 Incoming
Protocol
Select the protocol to be used from the drop down menu.
 TCP
 UDP
 ICMP
Rule Action
Allows you to 'Deny' or 'Allow' rule action by selecting the desired
radio button.
Source IP Address
Enter the source IP address in the text box provided.
Subnet Mask
Enter the source subnet mask in the text box provided.
Port
Enter the source port in the text box provided.
Destination IP
Address
Enter the destination IP address in the text box provided.
Subnet Mask
Enter the destination subnet mask in the text box provided.
Port
Enter the destination port in the text box provided.
Current Filter Table
Entries in this table are used to restrict certain types of data packets
through the Gateway. Use of such filters can be helpful in securing or
restricting your local network.
Select the check box against the desired interface for deletion and
click on Delete Selected button.
To delete all configured interfaces on the pane, click on Delete All
button. Check box against all interfaces on the page will get selected
and will be deleted.
MAC Filtering
Go to Firewall-> MAC Filtering in the navigation pane. MAC Filtering for bridge
mode page is displayed.